How hard is it to replace an over-the-counter microwave? - ge spacesaver microwave
I have a GE Spacesaver XL over-the-counter microwave oven works, but not heated. I will replace it and I wonder if there something I can do myself or if I am an installer (which charges $ 135 ). I have to install a new group ... and I heard the microwave can be dangerous to work with you if the discharge of the capacitor. suggestions?
Tuesday, January 5, 2010
Ge Spacesaver Microwave How Hard Is It To Replace An Over-the-counter Microwave?
6 comments:
In general, stick to the nails in the wall with four screws (at least 1 / 4 inch thick, and screws, 3 inches long), and maybe some screws in the last cabinet. You need to loosen two people, one for the unit and remove the screws. It can easily be wired up (likely), or plug in. If it is difficult to cable, you need to switch out the possibility that the power of the microwave to replace the wiring to find (remember how you came from - What is Wire color).
If no channel connected to work, find a problem, the right to remove the screws that are separating the pipe (always cover up a screw was somewhere past has no meaning)
However, it is a difficult task for someone who is very practical.
Its really easy.
MW is supplied with a back wall, simply screw in the back.
If they are aging on the back of the bolt holes used to wood, no screws alternately.
The Summit is a document of its employees to drill only the ribbon on the edge and the necessary holes.
As a rule 2 to the screws and 1 for the cable.
Do not worry about the capacitor, it is necessary to the microwave to install them all to open.
This is 1 / 2 hour to take to install, can someone help when lifting.
Good luck!
Its really easy.
MW is supplied with a back wall, simply screw in the back.
If they are aging on the back of the bolt holes used to wood, no screws alternately.
The Summit is a document of its employees to drill only the ribbon on the edge and the necessary holes.
As a rule 2 to the screws and 1 for the cable.
Do not worry about the capacitor, it is necessary to the microwave to install them all to open.
This is 1 / 2 hour to take to install, can someone help when lifting.
Good luck!
Someone simply sitting on a shelf. It is a standard 120V outlet on the back of the leaf. A frame of the telescope is on the front and screws in a wooden case with offers 4 small screws that mounted an integrated appearance. Everything to eliminate what I do is to remove the 4 screws, slide a bit, pull the plug and an elevator. Without the telescope, which is oppo-model could.
To replace, you will find with a bevel of the same dimensions.
Microwave needs to be plugged into a standard 120 volts, you simply drag. You may need a pair of hands, but only a question of removing the old and the new Assembly. You should be able to handle.
Microwave needs to be plugged into a standard 120 volts, you simply drag. You may need a pair of hands, but only a question of removing the old and the new Assembly. You should be able to handle.
Post a Comment